<p><strong>Why It Matters:</strong></p>
<ul>
<li>Unbalanced fill causes overpacking in early cavities, short shots in late cavities</li>
<li>Higher reject rates and longer cycle times</li>
</ul>

<p><strong>Manual Balancing Method:</strong></p>
<ol>
<li>Run short-shot experiments at 80-90% fill</li>
<li>Measure fill patterns</li>
<li>Weld shut the fastest-filling gate, recut to smaller cross-section</li>
<li>Iterate until all cavities fill within 5% of each other</li>
</ol>

<p><strong>Flow Analysis:</strong></p>
<p>Simulation predicts imbalance before cutting steel. Adjust gate size, runner diameter, and layout.</p>

<p><strong>Melt Rotation:</strong></p>
<p>Even geometrically balanced hot runners have "natural imbalance" from shear-induced temperature variation. Spiral mixing elements solve this.</p>

<p><strong>Practical Tips:</strong></p>
<ul>
<li>Add 10-15% extra runner length for future balancing</li>
<li>Document each iteration</li>
<li>For >32 cavities, consider staged filling</li>
</ul>

<hr>
<p><strong>相关推荐：</strong></p>
<ul>
<li><a href="https://www.mj7.cn/t/202310426340-x">发明公布-202310426340.X-金属粉末注射成型制备铜合金的方法及高强高导电铜合金</a></li>
<li><a href="https://www.mj7.cn/t/topic">หลักการออกแบบแม่พิมพ์ฉีดพลาสติกเบื้องต้น</a></li>
<li><a href="https://www.mj7.cn/t/202410674713-x">发明公布-202410674713.X-图案形成物体、注射成型物体和制造注射成型物体的方法</a></li>
</ul>

<hr>
<p>还有什么补充参数吗？一起完善。</p>