<p><strong>Weekly Checks:</strong></p>
<ul>
<li>Inspect water level - top off as needed</li>
<li>Check chemical treatment (pH should be 7.0-8.5)</li>
<li>Remove debris from basin and strainers</li>
<li>Listen for unusual pump noise (cavitation indicator)</li>
</ul>

<p><strong>Monthly Checks:</strong></p>
<ul>
<li>Clean spray nozzles - clogged nozzles reduce cooling by 40%</li>
<li>Inspect fan belts for tension and wear</li>
<li>Test water flow rate at mold supply lines</li>
<li>Check basin for algae growth - treat with biocide if present</li>
</ul>

<p><strong>Seasonal Maintenance:</strong></p>
<ul>
<li>Drain and clean entire system every 6 months</li>
<li>Replace filter media annually</li>
<li>Inspect and repair insulation on pipes</li>
<li>Calibrate temperature controllers</li>
</ul>

<p><strong>Pro Tip:</strong> Install a flow meter at each mold station. A 15% flow reduction often indicates blockage before it affects production.</p>

<p> <strong>延伸阅读</strong></p>
<p>• <a href="/t/wave/5">欢迎来到 模极社 - 模具行业专业社区！</a></p>
<p>• <a href="/t/topic/8627">注塑件缩水和变形的调机思路</a></p>
<p>• <a href="/t/topic/8626">小模具厂如何在价格战中活下去？</a></p>

<hr>
<p>你在实际生产中遇到过类似问题吗？欢迎留言讨论。</p>