<p><strong>General Condition</strong></p>
<ul>
<li>Check machine level - verify within 0.02mm/m</li>
<li>Inspect way covers for dents and corrosion</li>
<li>Run a test fire - listen for unusual sounds from servo motor</li>
<li>Check all axis movement for smoothness and backlash</li>
</ul>

<p><strong>Power Supply and Dielectric System</strong></p>
<ul>
<li>Verify power supply voltage matches your facility</li>
<li>Test dielectric pump pressure (should be 2-4 bar)</li>
<li>Inspect filters - replace if dirty</li>
<li>Check resin tank condition and capacity</li>
</ul>

<p><strong>CNC Controller and Software</strong></p>
<ul>
<li>Power cycle twice - watch for alarm codes on startup</li>
<li>Verify backup battery voltage (under 3V means replace soon)</li>
<li>Check that all parameters are saved (ask for parameter backup)</li>
<li>Load a sample NC program and dry run</li>
</ul>

<p><strong>Critical Measurements</strong></p>
<ul>
<li>X/Y/Z axis accuracy: check with laser interferometer</li>
<li>Table flatness: should be within 0.01mm</li>
<li>Spindle/head alignment</li>
<li>Wire tension gauge reading (for wire EDM)</li>
</ul>

<p><strong>Paperwork to Request</strong></p>
<ul>
<li>Maintenance logs for past 2 years</li>
<li>List of spare parts included</li>
<li>Original manual (electronic copy acceptable)</li>
<li>List of recent repairs</li>
</ul>

<p>Always ask for a test run cutting a sample part before committing.</p>

<p> <strong>延伸阅读</strong></p>
<p>• <a href="/t/hypermill-2026-cad-cam-40/8612">hyperMILL 2026新版发布：CAD/CAM编程提速40% 集成数字孪生</a></p>
<p>• <a href="/t/wave/5">欢迎来到 模极社 - 模具行业专业社区！</a></p>
<p>• <a href="/t/topic/8627">注塑件缩水和变形的调机思路</a></p>

<hr>
<p>踩过坑的来评论区说说。</p>