<p><strong>Common screw tip types:</strong></p>

<p><strong>Full-Round Check Ring</strong> — Best for general-purpose materials like ABS, PP, PE. Provides reliable backflow prevention with moderate wear resistance.</p>

<p><strong>Sliding Ring</strong> — Preferred for high-viscosity materials (PC, PMMA, PVC-U). The ring slides along the shaft rather than rotating, reducing wear on mating surfaces.</p>

<p><strong>Ball Check Valve</strong> — Suitable for low-viscosity materials (PA, POM). Simple construction but can cause material holdup in the ball seat area.</p>

<p><strong>Mazel-Type</strong> — Designed for heat-sensitive materials (PVC, PVDC). Streamlined flow path minimizes residence time.</p>

<p><strong>Selection guide by material:</strong></p>
<ul>
<li>Glass-filled nylons → Tungsten carbide coated full-ring</li>
<li>Clear PC (optical grade) → Sliding ring with polished finish</li>
<li>PVC rigid → Mazel-type, chrome-plated</li>
<li>General purpose → Standard full-ring nitrided</li>
</ul>

<p>Replace check rings when you see shot weight variation >3 percent or visible wear on sealing surfaces. Typical lifespan is 4000-8000 operating hours depending on material abrasiveness.</p>

<p>What type are you using on your injection press? Share your experience below.</p>

<hr>
<p>还有什么补充参数吗？一起完善。</p>