<p><strong>Daily:</strong> Check cooling water flow, lubricate moving parts, inspect for damage.</p>
<p><strong>Weekly:</strong> Clean vent slots, check ejector pins for wear, verify alignment.</p>
<p><strong>Monthly:</strong> Full inspection — cavity surface, cooling channels, heater bands.</p>
<p><strong>After production run:</strong> Apply rust inhibitor, store in dry environment.</p>

<p>Full guide: https://www.mfgabc.com/guides/mold-maintenance-repair.html</p>

<p>What is your mold maintenance schedule?</p>

<hr>
<p>你们厂里是怎么处理的？来评论区聊聊。</p>