<p><strong>Die Casting:</strong> High volume, 0.1-0.5mm tolerance, 80,000-150,000 shot die life. Best for aluminum and zinc.</p>
<p><strong>Investment Casting:</strong> Lower volume, 0.3-0.8mm tolerance, ceramic mold. Best for complex geometries and steel parts.</p>

<p>Cost: Die casting is cheaper per part at high volumes (>10K/year). Investment casting wins for low volume or complex shapes.</p>

<p>Full guide: https://www.mfgabc.com/guides/die-casting-vs-investment-casting.html</p>

<p>Which casting process do you use?</p>

<hr>
<p>踩过坑的来评论区说说。</p>