<ol>
<li>Simplify part geometry — fewer slides = lower cost</li>
<li>Standard mold base sizes — avoid custom base</li>
<li>P20 steel for 80% of applications</li>
<li>Standard components over custom parts</li>
<li>Family mold — multiple parts in one mold</li>
<li>Design for multi-cavity from day one</li>
<li>Choose cold runner over hot runner when possible</li>
</ol>

<p>Each strategy saves 10-30%. Combined, 40-60% savings possible.</p>

<p>Full guide: https://www.mfgabc.com/guides/mold-cost-reduction-strategies.html</p>

<hr>
<p>你们厂里是怎么处理的？来评论区聊聊。</p>