Common screw tip types:

Full-Round Check Ring — Best for general-purpose materials like ABS, PP, PE. Provides reliable backflow prevention with moderate wear resistance.

Sliding Ring — Preferred for high-viscosity materials (PC, PMMA, PVC-U). The ring slides along the shaft rather than rotating, reducing wear on mating surfaces.

Ball Check Valve — Suitable for low-viscosity materials (PA, POM). Simple construction but can cause material holdup in the ball seat area.

Mazel-Type — Designed for heat-sensitive materials (PVC, PVDC). Streamlined flow path minimizes residence time.

Selection guide by material:

• Glass-filled nylons → Tungsten carbide coated full-ring
• Clear PC (optical grade) → Sliding ring with polished finish
• PVC rigid → Mazel-type, chrome-plated
• General purpose → Standard full-ring nitrided

Replace check rings when you see shot weight variation >3 percent or visible wear on sealing surfaces. Typical lifespan is 4000-8000 operating hours depending on material abrasiveness.

What type are you using on your injection press? Share your experience below.

还有什么补充参数吗？一起完善。