Weekly Checks:

• Inspect water level - top off as needed
• Check chemical treatment (pH should be 7.0-8.5)
• Remove debris from basin and strainers
• Listen for unusual pump noise (cavitation indicator)

Monthly Checks:

• Clean spray nozzles - clogged nozzles reduce cooling by 40%
• Inspect fan belts for tension and wear
• Test water flow rate at mold supply lines
• Check basin for algae growth - treat with biocide if present

Seasonal Maintenance:

• Drain and clean entire system every 6 months
• Replace filter media annually
• Inspect and repair insulation on pipes
• Calibrate temperature controllers

Pro Tip: Install a flow meter at each mold station. A 15% flow reduction often indicates blockage before it affects production.

延伸阅读
• 欢迎来到 模极社 - 模具行业专业社区！
• 注塑件缩水和变形的调机思路
• 小模具厂如何在价格战中活下去？

你在实际生产中遇到过类似问题吗？欢迎留言讨论。