Injection Molding Troubleshooting Guide：核心技术要点、操作步骤与参数设置指南
-
<p>Short shot: Increase pressure</p>
<p>Flash: Increase clamp tonnage</p>
<p>Sink marks: Increase packing</p>
<p>Warpage: Optimize cooling</p>
<p>Burn marks: Improve venting</p><p>
<strong>延伸阅读</strong></p>
<p>• <a href="/t/return-pin/617">回针（Return Pin）</a></p>
<p>• <a href="/t/taper-lock/606">锥形精定位（Taper Lock）</a></p>
<p>• <a href="/t/ejector-pin/624">顶针（Ejector Pin）注塑模具用</a></p><hr>
<p>新手建议收藏，老手欢迎指点。</p>