Mold Fitting and Assembly — Best Practices：核心技术要点、操作步骤与参数...

[peng22]

Proper mold fitting reduces trial time:

Parting line fit — Apply bluing, check contact 70%+ on first match
Core-to-cavity alignment — Check with indicator, adjust taper locks
Ejector system — Pins should move freely with 0.01-0.02mm clearance
Cooling connections — Pressure test at 1.5x operating pressure
Slide mechanism — Check travel, clearance, and locking force

Full guide: https://www.mfgabc.com/guides/mold-fitting-assembly.html

What fitting tolerances do you use?

---

有没有同行遇到过同样的问题？分享一下经验。

[赵51]

产品结构上容易忽略的是拔模斜度和壁厚均匀性，注塑件这两个不处理好，缩水和变形就找上门了。

[邹91]

研发和生产脱节是常见问题，我们让工艺工程师参与评审，可制造性提前考虑。

[贾40]

产品结构上容易忽略的是拔模斜度和壁厚均匀性，这两个不处理好缩水变形就找上门。