5-Axis CNC Machining Guide — When to Upgrade：从入门到精通的完整教程与...
-
5-axis CNC machining advantages over 3-axis:
- One setup for complex parts
- Better surface finish
- Shorter lead time (fewer setups)
- Can machine complex geometries
Cost: 5-axis is 50-100% more per hour than 3-axis but can reduce total project cost by reducing setups.
Full guide: https://www.mfgabc.com/5-axis-cnc-machining-guide.html
还有什么补充参数吗？一起完善。
-
冲压毛刺问题，多数是模具刃口钝了。我们一般定个标准：冲压多少万次强制修模一次，别等产品出问题才想起来。
-
同行交流一下，我一般粗加工留0.3-0.5mm，半精加工再留0.1，精加工一刀到位。