Injection Molding Defects Guide — Causes and Fixes：核心技术要点...

[jack_zhao]

Common injection molding defects and how to fix them:

1. Warping — uneven cooling → balance mold temperature
2. Sink marks — insufficient packing → increase hold pressure/time
3. Flash — low clamp force or mold fit → increase tonnage or repair parting line
4. Short shot — low injection speed or material temp → increase both
5. Weld lines — cold melt front → increase mold temp and injection speed

Full guide: https://www.mfgabc.com/guides/injection-molding-defects-guide.html

---

你在实际生产中遇到过类似问题吗？欢迎留言讨论。